Bakers Pride SM27-2L 用户手册

下载
页码 16
Sandwich Merchandiser 
 
Installation 
 
 
Installation 
 
Serious injury, equipment damage or death could result if attempting to install this unit 
yourself. Ensure that an authorized BKI service agent installs the unit.  
 
Instructions For Shipping Damage 
You are responsible for filing all freight claims with the delivering truck line. Inspect all cartons and crates for 
damage when they arrive. If there is damage noted to shipping crates or cartons, or, if a shortage is found, note 
this on the bill of lading (all copies) before signing. 
 
If damage is detected when the equipment is uncrated, immediately call the delivering truck line and follow up the 
call with a written report indicating concealed damage to your equipment. Ask for an immediate inspection of your 
concealed damage item. Crating material MUST be retained to show the inspector from the truck line. 
Electrical Information 
 
 
Electrocution, equipment failure or property damage could result if an unlicensed 
electrician performs the electrical installation. Ensure that a licensed electrician perform 
the electrical installation in accordance with local codes, or in the absence of local codes, 
with the National Electrical Code, ANSI NFPA 70-20XX. 
 
This unit, when installed by an authorized BKI service agent, must be wired for use in accordance with all 
applicable local, state, and federal codes. For specific electrical requirements and connections refer to the wiring 
diagram attached to the unit or provided in the Service Manual. 
Important Installation Instructions 
 
 
LEVELING THE UNIT:  Your SM should be level for best operating results.  The unit may 
be leveled by placing shims under the base.  The shims must be made of metal or other 
non-combustible material.  If you have any questions, please contact your BKI 
Distributor. If they are unable to answer your questions, contact the BKI Technical 
Service Department, toll free: 1-800-927-6887. Outside the U.S., call 1-864-963-3471. 
 
 
 
COUNTERTOP INSTALLATIONS:  To conform to NSF Standard 4, countertop models 
are designed to be sealed to the supporting surface using an NSF approved Silicone 
sealant.  BKI recommends Dow Corning RTV # 732 Multi-purpose Sealant.  If you have 
any questions, please contact your BKI Distributor. If they are unable to answer your 
questions, contact the BKI Technical Service Department, toll free: 1-800-927-6887. 
Outside the U.S., call 1-864-963-3471. 
 
 
This unit is designed for pre-packaged foods only.  If you have any questions, please 
contact your BKI Distributor. If they are unable to answer your questions, contact the BKI 
Technical Service Department, toll free: 1-800-927-6887. Outside the U.S., call 1-864-
963-3471.