InSinkErator MS 用户手册

3

The MS Control Center is UL

®

 and CUL

®

 approved for 

use with InSinkErator Foodservice Disposers. See  
Table 1 for approved disposer and control center  
combinations. The control center operates the disposer. 
Its main functions are:
•  To start and stop the disposer.
•  To start the water flow to the disposer.

MS-4
MS-5

SS50-26, SS75-27, SS100-28, SS125-25, 

SS150-34, SS150-38, SS200-27, SS200-31

MS-5

SS50-27, SS75-28, SS100-29,  

SS125-26, SS150-36, SS150-39,  

SS200-29, SS200-32, SS300-25, SS300-27, 

SS500-28, SS500-29, SS500-30

MS-6

SS50-27, SS75-28, SS100-29,  

SS125-26, SS150-36, SS150-39,  
SS200-29, SS200-32, SS300-25,  

SS300-27, SS500-28, SS500-30, SS750-13, 

SS750-15, SS1000-10, SS1000-11, SS1000-12

MS-4

14356

120V

1

1/2-2

MS-5

14356A

208-230V

1

1/2-2

MS-5

14356A

208-230V

3

1/2-5

MS-6

14356B

380/460V

3

1/2-10

ENCLOSURE

 

NEMA 4 construction.

PUSH BUTTON OPERATION

Push Green button to start disposer. Push Red button to 
stop disposer.

Use of more than two solenoid valves will affect 

the overall function of the MS control center. Extra 

solenoid valves will cause a reduction in voltage and 

solenoid actuation will not occur.

Use the flanges at the back of the control center  
enclosure and only mount panel in the upright vertical 
position. See Figure 1.

Locate control center within sight of disposer per local 
codes. Locate any remote control station within sight of 
disposer per local codes.

If box is mounted to the sink table, recess the box so 
that the buttons do not extend beyond the table's edge.