Electrolux TINSE B425MR RO 用户手册

Please check the following before calling for service:

1. Place one cup of water in a glass measuring cup in the oven and close the door securely.

Operate the oven for one minute at HIGH 100%.

A   Does the oven light come on? 

YES _______   

NO _______

B   Does the cooling fan work? 

YES _______   

NO _______

 

(Put your hand over the rear ventilating openings.) 

C   Does the turntable rotate? 

YES _______   

NO _______

 

(It is normal for the turntable to turn in either direction.)

D   Is the water in the oven warm? 

YES _______   

NO _______

2. Remove water from the oven and operate the oven for 5 minutes at CONVECTION 450˚F.

A   Do CONVEC and COOK indicators light? 

YES _______   

NO _______

B   After the oven shuts off, is inside of the oven hot? 

YES _______   

NO _______

If “NO” is the answer to any of the above questions, please check electrical outlet, fuse and/or circuit 
breaker.  If  they  are  functioning  properly,  CONTACT  YOUR  NEAREST  ELECTROLUX AUTHORIZED 
SERVICER.
A microwave oven should never be serviced by a “do-it-yourself” repair person.

NOTE:
1.  If the time appearing in the display is counting down very rapidly, check Demonstration Mode on page 

33 and cancel.

2.  After cooking, the cooling fan may switch on to cool the oven cavity. When the cooling fan is on, the 

display may show “NOW COOLING” and you will hear the sound of the cooling fan.

3.  Your  oven  has  a  voltage  check  function.  If  the  voltage  rises  above  7%  or  falls  below  7%  of  the  

needed 240 volts, the cooking results would not be acceptable; therefore the oven will stop, display 
an error message and interrupt the cooking program. Press 

STOP/CLEAR and complete the cooking 

manually. It is imperative that the power to the oven be checked to ensure that a 240 volt circuit is 
serving the oven.