Sanyo EMS-8600S 用户手册

Remove all packing material and accessories. Examine the oven for any damage such 
as dents or broken door. Do not install if oven is damaged. Do not remove the light brown 
Mica cover that is attached inside the oven cavity to protect the magnetron.

NOTE: This unit is not designed for 50 Hz or any circuit other than a 120-volt/ 60-Hz AC 
circuit. This oven is designed for counter top installation.

1. Select a level surface that  

 

  provides enough open space for   
  the in take and/or outlet vents.

3"

3"

3"

A minimum clearance of 3 inches 
is required between the oven and 
any adjacent wall. One side must 
be open.

OPEN

•  Leave a minimum clearance of 3 inches
  above the oven.
•  Do not remove the legs from the bottom
  of the oven.
•  Blocking the intake and/or outlet  
  openings can damage the oven.
•  Place the oven as far away from radios
  and TV’s as possible. Operation of  
  microwave oven may cause interference  
  to your radio or TV.
•  If the cabinet is covered with a protective
 film, remove the film.
2. Plug your oven into a standard   
  120-volt / 60-Hz household outlet. 
  Be sure the electrical circuit is at least 15  
  amperes and that your microwave oven  
  is the only appliance on the circuit.

WARNING: Do not install oven over a range 
cook top or other heat-producing appliance. 
If installed near or over a heat source, the 
oven could be damaged and the warranty 
would be void.

-9-