GE 164D2092P020 用户手册
REUSABLE GREASE FILTERS
Your microwave oven has two
.
. -.
To install a new filter,
remove
plastic and other outer wrapping
the new filter. Insert
top opening of oven as shown. It
reusable metal filters to help remove
will rest at an
on two side
grease from the air and a disposable
support tabs and in front of right
charcoal filter to help remove smoke
rear tab.
and secure
and odors caused by cooking with
your range. When the fan is
operated, air is drawn up through
the filters and then recirculated.
your range. When the fan is
operated, air is drawn up through
the filters and then recirculated.
Charcoal
The disposable charcoal filter
should be replaced when it is
noticeably dirty or discolored
should be replaced when it is
noticeably dirty or discolored
(usually after 6 to 12 months,
depending on hood usage). Order
(Part No.
depending on hood usage). Order
(Part No.
from your
dealer. DO
CLEAN THIS
FILTER. DO
OPERATE
YOUR HOOD WITHOUT ALL
THREE FILTERS IN PLACE.
THREE FILTERS IN PLACE.
To remove the charcoal filter,
disconnect power at main fuse
or circuit breaker or pull plug.
disconnect power at main fuse
or circuit breaker or pull plug.
Remove the top grill by taking off
3 screws which hold it in place.
Grasp filter and slide toward front
of oven. It will slide right out.
3 screws which hold it in place.
Grasp filter and slide toward front
of oven. It will slide right out.
with 3 screws.
Grease
The grease filters should be
cleaned at least once a month.
cleaned at least once a month.
Never operate your hood without
the filters in place. In situations
where flaming might occur on
surfaces below hood, filter will
retard entry of flames into the unit.
the filters in place. In situations
where flaming might occur on
surfaces below hood, filter will
retard entry of flames into the unit.
To remove grease filter,
grasp the
“finger hold” on the filter and slide
to the rear.
I
I
[’
Then pull filter downward and to
the front. The filter will drop out.
the front. The filter will drop out.
To clean grease filter, soak,
then agitate filter in hot detergent
solution. Don’t use ammonia or
other alkali because it will darken
metal. Light brushing can be used
to remove embedded dirt.
metal. Light brushing can be used
to remove embedded dirt.
Rinse. shake and remove moisture
before replacing.
Filters should be cleaned at least
once a month. Never operate
your hood without the filters in
place.
once a month. Never operate
your hood without the filters in
place.
In situations where flaming
might occur on surfaces below
hood, filters will retard entry of
flames into the unit.
hood, filters will retard entry of
flames into the unit.
I
I
To replace grease filter,
slide the
filter in the frame slot on the back
of the opening.
Pull filter upward and to the front
to lock into place.
to lock into place.
off the grease and dust
on hood surfaces often. Use a
warm detergent solution. About
warm detergent solution. About
1 tablespoon of ammonia maybe
added to the water. Take care not
to touch the filters and enameled
to touch the filters and enameled
surfaces with this. Ammonia
will tend to darken metal.
will tend to darken metal.
28