HP (Hewlett-Packard) E1368A 用户手册

OUTPut

The

OUTPut

subsystem enables or disables the "Trig Out" port of the HP

E1300/E1301 Mainframe or on the HP Command Module.

Subsystem Syntax

OUTPut

[:STATe] <

state

[:STATe]?

[:STATe]

OUTPut[:STATe] <

state

enables/disables the "Trig Out" port on the rear

panel of the HP E1300A/E1301A Mainframe or on the HP Command
Module.

OUTPut[:STATe] ON | 1 enables the port and OUTPut[:STATe]

OFF | 0

disables the port.

Parameters

Parameter Name

Parameter Type

Range of Values

Default Value

state

boolean

0 | 1 | ON | OFF

OFF | 0

Comments

•

Enabling "Trig Out" Port: When enabled, a pulse is output from
the "Trig Out" port after each switchbox channel is closed. If
disabled, a pulse is not output from the "Trig Out" port after channel
closures. The output pulse is a +5V negative-going pulse.

•

"Trig Out" Port Shared by Switchboxes: When enabled, the "Trig
Out" port may be pulsed by any switchbox each time a scanned
channel is closed. To disable the output for a specific switchbox,
send the

OUTPut[:STATe] OFF

OUTPut[:STATe] 0

command for

that switchbox.

•

Related Commands:

[ROUTE:]SCAN

TRIGger:SOURce

•

*RST Condition:

OUTPut[:STATe] OFF

(port disabled)

Example

Enabling "Trig Out" Port

OUTP:STAT ON

Enables "Trig Out" port to output
pulse after each scanned channel is
closed.

[:STATe]?

OUTPut[:STATe]?

queries the present state of the "Trig Out" port. The

command returns 1 if the port is enabled, or 0 if disabled.

Example

Query "Trig Out" Port Enable State

This example enables the "Trig Out" port and queries the enable state. The

OUTPut[:STATe]?

command returns 1 since the port is enabled.

OUTP:STAT ON

Enables "Trig Out" port for pulse
output.

OUTP:STAT?

Query port enable state.

Chapter 4

HP E1368A/69A/70A Command Reference 57