Hotpoint RVM1335WC 产品宣传页

下载
页码 2
RVM1335WC—Hotpoint 1.3 Cu. Ft. Counter Saver Plus
Microwave Oven
Specification Revised 6/00
R
Listed by
Underwriters
Laboratories
Dimensions (in inches)
21-3/4"
Door open
16-1/2"
66" MIN.
Mounting
height
from
floor
30"
MIN.
width 
required
12"
MAX.
Exhaust outlet
connects to
3-1/4" X 10" duct
14"
15-7/8"
Important Information: When installing the Counter Saver Plus
microwave oven over a range, allow minimum of 2" from bottom of
Counter Saver Plus
microwave oven to top of range backguard to allow 
for removal of light covers.
Installation Information: This information is not intended to be used for
installing unit described. Before installing, consult installation instructions
packed with product/kit for current dimensional data.
When replacing a 36" or 42" 
range hood, this kit fills in the 
additional width to provide a 
custom, built-in appearance. For 
installation between cabinets only; 
not for end-of-cabinet installation.
Each kit contains two, 3"-wide filler
panels. Two kits are needed for a 
42" opening.
JX81A–Recirculating
Charcoal Filter Kit
To be used when the
Counter Saver Plus
microwave oven cannot
be vented to the outside.
Optional Accessories (Available at additional cost)
12” Filler Panel Kits 
JX41–Black Filler Panel Kit
JX40WH– White Filler Panel Kit
Ventilation Options: The Counter Saver Plus™ microwave oven is designed for adaptation
for the following three types o ventilation:
Outside Exhaust (Vertical–as shown above)
Outside Exhaust (Horizontal)
Recirculating Exhaust (Non-vented ductless–see Filter Kit Drawing)
Note: Before Installing, comsult installation instructions for curent dimensional data on
these therr types of ventilation