Smeg CH400 用户手册

10

Before cleaning, disconnect the power sup-

ply and remove all loose fittings.
The cabinet is best cleaned using warm 

water (max. 65 °C) with a little mild, 

perfume-free detergent. Never use cleaning 

agents that scour. Use a soft cloth. Rinse 

with clean water and dry thoroughly. It is 

important to prevent water from entering the 

control panel.
The sealing strip around the lid must be 

cleaned regularly to prevent discolouration 

and prolong service life. Use clean water. 

After cleaning the sealing strip, check that it 

continues to provide a tight seal.
The ventilation grille must be kept free 

of dust and dirt. Clean it with a vacuum 

cleaner.
If the appliance is not to be used for any 

length of time, switch it off, disconnect the 

power supply, empty it, clean the cabinet 

and leave the lid open to allow air circula-

tion and prevent smells.

1. Disconnect the power supply by pulling 

the plug out of the socket.
2 . Remove the lamp cover by pressing its 

upper edge downwards to release it from 

the two clips (fig. 7).
3. Replace the bulb(s).
4. Refit the cover and reconnect the power 

supply.

max.

15 W

fig. 7

 

● The lower ambient temperature the lower 

energy consumption.

 

● The lower temperature inside the unit the 

higher energy consumption. 

 

● Recommended temperature -18°C

 

● Defrost when the ice build-up is more 

than 5 mm thick.

 

● Do not open the lid more than necessary.

 

● Cool hot food and beverages before plac-

ing them in the freezer.

 

● Thaw frozen items in a refrigerator.

 

● Place frozen items in a refrigerator while 

defrosting the freezer.