Belkin belkin bulldog plus- shutdown management software for windows 用户手册

Network

Set Password

Sets the Bulldog Service password.

Choose Master/Slave

Please refer to the BULLDOG Service operation mode. If the computer

connects to UPS directly (with RS-232 or USB) and can send commands

to its connected UPS then the BULLDOG Service acts as a "Master". If it

connects to UPS directly (with RS-232 or USB) but only listens to UPS

then it is a "Serial Slave". If the computer is powered by the UPS, but

obtains the UPS information from Master via TCP/IP network then it is a

"Networking Slave". When BULLDOG Service is a Networking Slave you

must assign the Master IP address so that the Networking Slave can

connect to the Master and obtain the UPS information.

a. Master: Configures the BULLDOG Service to be a Master.

b. Serial Slave: Configures the BULLDOG Service to be a Serial Slave.

c. Networking Slave: Configures the BULLDOG Service to be a

Networking Slave.

d. Master IP Address: When BULLDOG Service is a Networking Slave

you must assign the Master IP address so that the Slave can connect

to the Master host and obtain the UPS information.

Belkin Components