Whirlpool Series 945 用户手册

You can customize your cycles by pressing an option. If you 
change your mind, press the option again to turn the option off. 
Select a different option if desired. 

You can change an option anytime before the selected option 
begins. For example, you can press an unheated drying option 
any time before drying begins.

After a wash cycle, the dishwasher remembers the options used 
and uses the same options in the next wash cycle, unless you 
select new options or press Cancel/Drain.

Select this high-temperature option for improved cleaning of 
heavily soiled dishes. Selecting this option adds heat, water and 
time to the wash cycle. Heating the water helps improve washing 
results.

The Pots & Pans cycle, with the Hi-Temp Scour feature, is 
recommended for baked-on soil.

The Hi-Temp Scour feature is an option with Pots & Pans 

and Heavy Wash.

Select this option to raise the water temperature in the final rinse 
to approximately 155°F (68°C) for 10 minutes. The SANI RINSE 
option adds heat and time to the cycle. In the Pots & Pans and 
Heavy Wash cycles, this high-temperature rinse sanitizes your 
dishes and glassware in accordance with the NSF Protocol P153 
Sanitization and Cleaning Performance of Household Spray-Type 
Dishwashers.

Use the SANI RINSE option with the Pots & Pans and 

Heavy Wash cycles.

Select this option to dry dishes without heat and save energy. 
The dishes take longer to dry and some spotting can occur.

For best drying, use a liquid rinse aid. Some items (such as 
plastics) may need towel drying.

 The dishwasher automatically heats the air in the 

dishwasher during the “dry” portion of the cycle unless you 
select Air Dry.

Use Delay Hours to run your dishwasher at a later time or during 
off-peak hours. You can add items to the load anytime during the 
delay countdown. After adding items, close the door firmly until it 
latches. The delay countdown will not continue if the door is not 
latched.

Close the door.

Press Delay Hours 1 time for a 2-hour delay, 2 times for a 4-
hour delay, or 3 times for a 6-hour delay.

Select a wash cycle and option.

The number glows above Delay Hours. The dishwasher starts the 
cycle in the selected number of hours. If you do not press a cycle 
within 30 seconds, the Delay Hours indicator turns off.

■

To cancel the delay and cycle, press Cancel/Drain.

■

To cancel the delay and start the cycle, press Delay Hours 
until “6” glows. Then press Delay Hours one more time. The 
delayed cycle starts.

Follow the progress of your dishwasher with the Cycle Status 
Indicators. Clean glows when a cycle is finished. The light turns 
off when you open the door or press Cancel/Drain.

 Your model may have some or all of these indicators.

Heat Water glows whenever water is heated during a cycle. Wash 
or rinse action continues as the water heats.

If you select the SANI RINSE™ option, SANITIZED glows when 
the SANI RINSE cycle is finished. If your dishwasher did not 
properly sanitize your dishes, the light flashes at the end of the 
cycle. This can happen if the cycle is interrupted. The light goes 
off when you open the door.

CLEAN glows when a cycle is finished. The light turns off when 
you open the door or press Cancel/Drain.