Whirlpool ADP8000 用户手册
18
WARNING!
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak,
the water should be removed before restarting the dishwasher.
If there is water in the base pan because of an overfill or small leak,
the water should be removed before restarting the dishwasher.
Longer inlet time.
Faucets is not opened, or water intake is restricted,
or water pressure is too low.
or water pressure is too low.
Some element of dishwasher leaks .
Overflow.
Use more detergent, or change your detergent.
Rearrange the items so that the sp ay can rotate freely.
r
Clean and/or fit the filter combination correctly.
Clean the sp ay arm jets. See "Cleaning the Spray
Arms".
Clean the sp ay arm jets. See "Cleaning the Spray
Arms".
r
Use less detergent if you have soft water and select
a shortest cycle to wash the glassware and to get
them clean.
a shortest cycle to wash the glassware and to get
them clean.
Use a mild abrasive cleaner to eliminate those marks.
Re-loading the dishes properly.
Load the dishwasher as suggested in the directions.
Increase the amount of rinse-aid/refill the rinse-aid
dispenser.
dispenser.
Do not empty your dishwasher immediately after
washing. Open the door slightly so that the steam can
escape. Begin unloading the dishwasher only once the
dishes are barely warm to the touch. Empty the low
basket first. This prevents water form dropping off
dishes in the upper basket.
washing. Open the door slightly so that the steam can
escape. Begin unloading the dishwasher only once the
dishes are barely warm to the touch. Empty the low
basket first. This prevents water form dropping off
dishes in the upper basket.
In short programs the washing temperature is lower,
which affects the drying performance. Choose a
program with a longer washing time.
which affects the drying performance. Choose a
program with a longer washing time.
Water drainage is more difficult with these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
Not enough detergent
was dispensed.
was dispensed.
Items are blocking
the path of sp ay arms.
the path of sp ay arms.
r
The filter combination
in the base of wash
cabinet is not clean or
is not correctly fitted.
This may cause
the sp ay arm jets
to get blocked.
in the base of wash
cabinet is not clean or
is not correctly fitted.
This may cause
the sp ay arm jets
to get blocked.
r
Combination of soft
water and too much
detergent.
water and too much
detergent.
Aluminum utensils
have rubbed against
dishes.
have rubbed against
dishes.
Dishes block the cover of
detergent dispenser.
detergent dispenser.
Improper loading
Too little rinse-aid
Dishes are removed
too soon
too soon
Wrong program
has been selected
has been selected
Use of cutlery with
a low-quality coating
a low-quality coating
The dishes were not
loaded correctly.
loaded correctly.
See notes in " Loading the Dishwasher ".
Select a more intensive programme.
See" Wash Cycle Table .
See" Wash Cycle Table .
"
The programme was
not adequate.
not adequate.