Whirlpool GBD307 用户手册

下载
页码 16
10
Convection Baking and Roasting
1. Broil element
2. Convection fan
3. Bake element
During convection baking or roasting , the bake and broil 
elements cycle on and off in intervals to maintain the oven 
temperature, while the fan constantly circulates the hot air.
If the oven door is opened during convection baking or roasting, 
the broil element and fan will turn off immediately and the bake 
element will turn off in 2 minutes. They will come back on once 
the door is closed.
For optimal cooking results, do not use aluminum foil.
Reduce recipe temperature 25°F (14°C). The cook time may 
need to be reduced also. See the cookbook supplied with 
this oven for more information. 
To Convection Bake or Roast:
Before convection baking or roasting, position the racks 
according to the “Positioning Racks and Bakeware” section. 
When using two racks, place them on rack positions 2 and 4.
When roasting with CONVECT BAKE, use the roasting rack on 
top of the broiler pan and grid. It is not necessary to wait for the 
oven to preheat before putting food in, unless recommended in 
the recipe.
1. Roasting rack
2. Broiler grid
3. Broiler pan
1.
Press  CONVECT (UPPER).
Close oven door. The display will show “door” and the 
heating elements will not heat if the door is open when baking 
and roasting.
Press the TEMP “up” or “down” arrow pad to enter a 
temperature other than 325°F (177°C). The bake range can be 
set between 170°F and 500°F (77°C and 260°C).
2.
Press START/ENTER.
A preheat time will count down and “PrE°” will appear on the 
oven display if the actual oven temperature is under 170°F 
(77°C).
When the  actual oven temperature reaches 170°F (77°C), the 
timer will continue counting down. The temperature setting 
can be changed any time after pressing START/ENTER.
When the set temperature is reached, if enabled, one tone will 
sound.
3.
Press UPPER OFF, LOWER OFF or OFF/CANCEL when 
finished cooking.
Broiling and Custom Broiling
1. Broil element
Broiling uses direct radiant heat from the broil element to cook 
food. During broiling, the broil element cycles on and off in 
intervals to maintain the oven temperature.
If the oven door is opened during broiling, the broil element will 
turn off immediately and come back on once the door is closed.
Use only the broiler pan and grid provided with the appliance. 
It is designed to drain juices and help prevent spatter and 
smoke.
For proper draining, do not cover the grid with foil. The 
bottom of the pan may be lined with aluminum foil for easier 
cleaning.
Trim excess fat to reduce spattering. Slit the remaining fat on 
the edges to prevent curling.
Pull out oven rack to stop position before turning or removing 
food. Use tongs to turn food to avoid the loss of juices. Very 
thin cuts of fish, poultry or meat may not need to be turned.
After broiling, remove the pan from the oven when removing 
the food. Drippings will bake on the pan if left in the heated 
oven, making cleaning more difficult.
To Broil:
Before broiling or custom broiling, position the rack according to 
the Broiling Chart.
Position food on the grid in the broiler pan, then place it in the 
center of the oven rack with the longest side parallel to the door. 
It is not necessary to preheat the oven before putting food in, 
unless recommended in the recipe.
Close the door.
1.
On double oven models only, press UPPER OVEN or LOWER 
OVEN.
2.
Press CUSTOM BROIL.
3.
Press START/ENTER.
The set oven temperature will appear on the oven display 
until the oven is turned off.
4.
Press UPPER OFF, LOWER OFF or OFF/CANCEL when 
finished cooking.
1
3
2
1