Husqvarna 327RDX 用户手册
ASSEMBLY
English
–
13
•
Position the handlebar as shown. Fit the mounting
components and tighten the knob lightly.
components and tighten the knob lightly.
•
Put on the harness and hang the machine from the
support hook. Now make a final adjustment so that
the machine is in a comfortable working position when
it hangs from the harness. Tighten the knob.
support hook. Now make a final adjustment so that
the machine is in a comfortable working position when
it hangs from the harness. Tighten the knob.
Assembling and dismantling the
two-piece shaft (327RDx)
two-piece shaft (327RDx)
Assembly
•
Loosen the coupling by turning the knob.
•
Align the tab of the attachment (A) with the arrow on
the coupling (B).
the coupling (B).
•
Push the attachment into the coupling until the
attachment snaps into place.
attachment snaps into place.
•
Before using the unit, tighten the knob securely.
Dismantling
•
Loosen the coupling by turning the knob (at least 3
times).
times).
•
Push and hold the button (C). While securely holding
the engine end, pull the attachment straight out of the
coupling.
the engine end, pull the attachment straight out of the
coupling.
A
B
C