Husqvarna 1153286-26 用户手册

English

 –

 13

Never start the machine:

1

If you have spilt fuel on it. Wipe off the spillage and 
allow remaining fuel to evaporate.

2

If you have spilt fuel on yourself or your clothes, 
change your clothes. Wash any part of your body that 
has come in contact with fuel. Use soap and water.

3

If the machine is leaking fuel. Check regularly for 
leaks from the fuel cap and fuel lines.

•

Store and transport the machine and fuel so that there 
is no risk of any leakage or fumes coming into contact 
with sparks or naked flames, for example, from 
electrical machinery, electric motors, electrical relays/
switches or boilers.

•

When storing and transporting fuel always use 
approved containers intended for this purpose.

•

When storing the machine for long periods the fuel 
tank must be emptied. Contact your local petrol 
station to find out where to dispose of excess fuel.

•

The transport guard must always be fitted to the 
cutting attachment when the machine is being 
transported or in storage.

•

Secure the machine during transport.

•

Ensure the machine is cleaned and that a complete 
service is carried out before long-term storage.

CAUTION!  The machine is equipped with a four-stroke 
engine.  Make sure that there is always sufficient oil in the 
oil tank.

Always use an unleaded quality petrol of at least 90 
octane (RON).

Use low-emission petrol, also known as alkylate petrol, if 
it is available. 

•

The lowest recommended octane grade is 90 (RON). 
If you run the engine on a lower octane grade than 90 
so-called knocking can occur. This gives rise to a high 
engine temperature and increased bearing load, 
which can result in serious engine damage.

•

When working at continuous high revs a higher octane 
rating is recommended.

•

If the machine is not used for some time the fuel tank 
should be emptied and cleaned.

Check the oil level before starting the machine.  A too low 
oil level can cause serious damage to the engine.

When the machine is new the engine oil should be 
changed after the first month or after 10 hours of 
operation.

•

For the best result and function use HUSQVARNA 
engine oil.

•

When HUSQVARNA engine oil is not available 
another high grade engine oil can be used.  Contact 
your dealer when selecting oil. Engine oil for four-
stroke petrol engines must be used. Quality class at 
least API SG. In general viscosity class SAE 10W-40 
is recommended.

•

Never use oil intended for two-stroke engines.

The machine must be switched off and placed on a flat 
surface when you check the oil level.

Unscrew the oil cap, clean the dipstick located on the cap 
and insert the cap again without screwing it down.  Check 
the oil level on the dipstick.