Husqvarna 335FR 用户手册

English

 –

 21

Primer bulb: Press the air purge repeatedly until fuel 
begins to fill the bulb. The bulb need not be completely 
filled. 

Hold the body of the machine on the ground using your 
left hand (CAUTION! Not with your foot!). Grip the starter 
handle, slowly pull out the cord with your right hand until 
you feel some resistance (the starter pawls grip), now 
quickly and powerfully pull the cord. Never wrap the 
starter cord around your hand

Repeat pulling the cord until the engine starts. When the 
engine starts. return choke control to run position and 
apply full throttle; the throttle will automatically disengage 
from the start setting.

CAUTION!  Do not pull the starter cord all the way out and 
do not let go of the starter handle when the cord is fully 
extended. This can damage the machine.

CAUTION!  Do not put any part of your body in marked 
area. Contact can result in burns to the skin, or electrical 
shock if the spark plug cap has been damaged. Always 
use gloves. Do not use a machine with damaged spark 
plug cap.

Set the throttle to the start position by first pressing the 
throttle lockout and the throttle trigger, then pressing the 
start throttle button (A). Then release the throttle lockout 
and the throttle trigger, followed by the start throttle 
button. The throttle function is now activated. To return the 
engine to idle, press the throttle lockout and throttle 
trigger again.

Stop the engine by switching off the ignition.

CAUTION!  The stop switch automatically returns to the 
start position. In order to prevent unintentional starting, 
the spark plug cap must be removed from the spark plug 
when assembling, checking and/or performing 
maintenance.