Bushnell 98041 用户手册

下载
页码 12
Page 6
FOR ANY REPAIRS OR ADJUSTMENTS – OTHER THAN THOSE DETAILED IN 
THIS MANUAL – PLEASE CONTACT 1-800-LOCTITE.
8.
Care and Maintenance
Every attempt has been made to make this exceptionally powerful tool both reliable 
and trouble-free.  However the following precautions should be noted:
•  Make sure that the applicator is up to temperature before attempting to operate.
•  Do not leave the applicator switched on for long periods without use.  If the
applicator is not to be used for forty minutes or more, switch it off and restart when 
required.
•  Keep the applicator upright when not in use, never lay it on its side.  Always use the 
stand provided, or the optional bench stand or suspension unit (see Spares and 
Accessory lists at the end of this manual).
•  Do not use excessive force on the trigger.  Ensure that the tool has fully warmed up 
before use.
•  Keep the nozzle clean to prevent adhesive build-up.  This is easily done by wiping 
the nozzle with clean paper or cloth while the nozzle is still warm.
9.
Accessories and Spare Parts
Spare Parts
Part Number
Complete Nozzle Assembly – Wide Angle 2mm
985122
(fitted as standard)
Applicator Stand
985069
Barrel PTFE
985071
Barrel Support Assembly
985091
Piston Support Assembly
985093
Piston
985095
Thermostat Assembly, 180
°C
985123
Thermostat Assembly, 195
°C (for polyamides)
985079
Heater Assembly 120 Volts
985080
PCB Assembly
985083
Thermal Fuse, Spacer Assembly
985076
Valve Body Airline Adapter
985240
Heater Housing Kit For 98037 (EVA Adhesive)
985232
Qty 1 – O-ring Heater Housing, item 5
Qty 1 – Heater Housing, item 6
Qty 1 – Fitting, item 30
Qty 1 – Ground Screw, item 38
Qty 1 - Lock Washer, item 42
Heater Housing Kit For 98041 (Polyamides Adhesives) 985239
Qty 1 – O-ring Heater Housing, item 46
Qty 1 – Heater Housing, item 47
Qty 1 – Fitting, item 30
Qty 1 – Ground Screw, item 38
Qty 1 - Lock Washer, item 42
Handle Kit
985228
Qty 2 – Moulded handles, item 1
Qty 6 – Casing Screws, item 37
Piston Support Hardware Kit
985229
Qty 1 – Washer, special with 4 holes, item 33