Motorola SBG900 用户手册

Troubleshooting

Contact

Specifications Glossary

Configuration:   Basic   Gateway   TCP/IP   Wireless   USB

   

If you enabled WPA and set a PSK Passphrase by 

, you must configure the 

same passphrase (key) on each wireless client. The SBG900 cannot authenticate a client if:

•

WPA is enabled on the SBG900 but not on the client

•

The client passphrase does not match the SBG900 PSK Passphrase

For information about the WPA support in Windows XP, visit:

You can download the Microsoft Windows XP Support Patch for WPA from 

If you enabled WEP and set a key by 

, you must configure the same WEP key on 

each wireless client. The SBG900 cannot authenticate a client if:

•

Shared Key Authentication is enabled on the SBG900 but not on the client

•

The client WEP key does not match the SBG900 WEP key

On a WLAN client equipped with a Motorola wireless adapter, you can enter the WEP Passphrase you set when 
you configured the SBG900. For all other wireless adapters, you must enter the 64-bit or 128-bit WEP key 
generated by the SBG900.

To distinguish it from other nearby WLANs, you can identify your WLAN with a unique network name (also known 
as a network identifier or ESSID). When prompted for the network identifier, network name, or ESSID, type the 
name set in the ESSID field on the 

 in the SBG900 Setup Program. For more 

information, see “

After you specify the network name, many wireless cards or adapters automatically scan for an

 

access point such 

as the SBG900 and the proper channel and data rate. If your card requires you to manually start scanning for an

 

access point, do so following the instructions in the documentation supplied with the card.