Festool PD571579 用户手册
9
the tool from seizing. Corners, sharp edges
or a jump back tend to cause the rotating tool
to catch, thus leading to a loss of control or a
kickback.
or a jump back tend to cause the rotating tool
to catch, thus leading to a loss of control or a
kickback.
Special safety instructions for fi ne sanding
Do not use excessively large sanding discs
–
when fi ne sanding. Observe the specifi cations
of the manufacturer when selecting abrasive
discs. A sanding disc that is too large and
protrudes over the sanding pad represents a
cutting injury hazard and can cause catching,
disc tears or kickbacks.
of the manufacturer when selecting abrasive
discs. A sanding disc that is too large and
protrudes over the sanding pad represents a
cutting injury hazard and can cause catching,
disc tears or kickbacks.
Additional warning notes
Hold the machine fi rmly with both hands and
–
assume a stable stance when performing work.
Hold the machine with both hands to guide more
securely.
If potentially explosive or self-igniting dust
Hold the machine with both hands to guide more
securely.
If potentially explosive or self-igniting dust
–
is produced during sanding, the processing
instructions of the material manufacturer must
be observed under all circumstances.
instructions of the material manufacturer must
be observed under all circumstances.
Harmful/toxic dusts can be produced during
–
your work (e.g. lead-containing paint, some
types of wood and metal). Contact with these
dusts, especially inhaling them, can represent a
hazard for operating personnel or persons in the
vicinity. Comply with the safety regulations that
apply in your country. Connect the electric power
tool to a suitable extraction system. To protect
your health, wear a P2 protective mask.
Never use machines with a damaged cable.
types of wood and metal). Contact with these
dusts, especially inhaling them, can represent a
hazard for operating personnel or persons in the
vicinity. Comply with the safety regulations that
apply in your country. Connect the electric power
tool to a suitable extraction system. To protect
your health, wear a P2 protective mask.
Never use machines with a damaged cable.
–
Do not touch damaged cables and pull the
plug from the mains power supply if the cable
becomes damaged during work. Damaged
cables increase the risk of electric shock.
Use a maximum of two extension pipes on the
plug from the mains power supply if the cable
becomes damaged during work. Damaged
cables increase the risk of electric shock.
Use a maximum of two extension pipes on the
–
machine.
Health hazard by dust
Various dust created by power
sanding, sawing, grinding, drilling and other con-
struction activities contains chemicals known (to
the State of California) to cause cancer, birth de-
fects or other reproductive harm. Some examples
of these chemicals are:
struction activities contains chemicals known (to
the State of California) to cause cancer, birth de-
fects or other reproductive harm. Some examples
of these chemicals are:
Lead from lead-based paints,
–
Crystalline silica from bricks and cement and
–
other masonry products,
Arsenic and chromium from chemically-treated
Arsenic and chromium from chemically-treated
–
lumber.
The risk from these exposures varies, depending
on how often you do this type of work.
on how often you do this type of work.
To reduce your exposure to these
chemicals work in a well ventilated
area and use approved safety equip-
ment, such as dust masks that are
specially designed to fi lter out mi-
croscopic particles. Wash hands after
handling.
area and use approved safety equip-
ment, such as dust masks that are
specially designed to fi lter out mi-
croscopic particles. Wash hands after
handling.
T
O REDUCE THE RISK OF INJURY,
USER MUST READ INSTRUCTION MANUAL.
Technical data
Power 550
W
Rotational speed
340 – 910 rpm
Sanding pad dia.
215 mm (8.5’’)
Abrasive dia.
225 mm (8.9’’)
Tool holder
D 13/10
Dust extractor connection dia.
36 mm (1.4’’)
(27 mm (1.06’’))
Length of short version (without extension pipe)
1.10 m (43.3’’)
Length of long version (with extension pipe)
1.60 m ( 63.0’’)
Weight without cable
Short version
Short version
3.80 kg (8.4 lbs)
Long version
4.60 kg (10.1 lbs)
Protection class
II/
Functional description
The pictures for the functional description are on
a fold-out page at the beginning of the instruction
manual. When reading of the manual you can fold
out this page for having always an overview of the
machine.
a fold-out page at the beginning of the instruction
manual. When reading of the manual you can fold
out this page for having always an overview of the
machine.
[1-1] Sanding
head
[1-2] Extension
pipe
[1-3]
Speed control adjusting wheel
[1-4] On/off
switch
[1-5]
Suction power adjusting wheel
[1-6] Handle
section
[1-7] Abrasive
[1-8]
Mains power cable