Toshiba 203S 用户手册
TROUBLESHOOTING AND MAINTENANCE
62
Error
indicator
indicator
Blinks
INSTALL A TONER
CARTRIDGE.
CARTRIDGE.
The toner cartridge is not installed
correctly. Reinstall the toner cartridge.
correctly. Reinstall the toner cartridge.
Steadily
lit
lit
TONER
CARTRIDGE IS
NEAR EMPTY.
CARTRIDGE IS
NEAR EMPTY.
Replacement of toner cartridge will be
needed soon. Prepare a new cartridge.
needed soon. Prepare a new cartridge.
MAINTENANCE
REQUIRED CALL
FOR SERVICE
REQUIRED CALL
FOR SERVICE
Service by an authorized TOSHIBA
service technician is required.
service technician is required.
-
MEMORY FULL, PRESS START TO
RESUME.
RESUME.
Data is being held in memory. Print the
data or clear it from memory.
data or clear it from memory.
NO 2-SIDED COPY FROM BYPASS
TRAY.
TRAY.
Two sided printing or 2 IN 1 copying is
selected when the bypass tray is already
selected ,or the bypass tray is selected
when two-sided printing or 2 IN 1
copying is already selected.
The bypass tray cannot be used. Press
the [TRAY SELECT] key (
selected when the bypass tray is already
selected ,or the bypass tray is selected
when two-sided printing or 2 IN 1
copying is already selected.
The bypass tray cannot be used. Press
the [TRAY SELECT] key (
) to select
a paper tray.
NO 2IN1 COPY FROM
BYPASS TRAY.
BYPASS TRAY.
NO 2IN1 COPY WITH MARGIN
SHIFT.
SHIFT.
2 IN 1 copy and margin shift cannot be
used in combination. Cancel the
function that was selected last.
used in combination. Cancel the
function that was selected last.
COPY RATIO CAN NOT BE
CHANGED IN 2IN1.
CHANGED IN 2IN1.
Copy ratio can not be changed in 2 IN 1
copy.
copy.
THIS MENU IS NOT SELECTABLE
WITH DATA.
WITH DATA.
This appears if you attempt to change a
user program setting while a print job is
in progress.
user program setting while a print job is
in progress.
NO XXXX SIZE TRAY
There is no paper for printing. Press the
[MODE SELECT] key to switch to printer
mode and follow the instructions in the
display.
("XXXX" indicates paper size)
[MODE SELECT] key to switch to printer
mode and follow the instructions in the
display.
("XXXX" indicates paper size)
-
CHECK ADF/RADF.
START TO RESUME.
START TO RESUME.
An original remains on the document
glass, or the original is too thick to scan.
Remove the original.
glass, or the original is too thick to scan.
Remove the original.
If the message is not cleared when there
is no original on the document glass, the
underside of the document cover/RADF
is dirty. Clean the underside of the
document cover/RADF. (especially
areas where black lines appear.)
is no original on the document glass, the
underside of the document cover/RADF
is dirty. Clean the underside of the
document cover/RADF. (especially
areas where black lines appear.)
LOAD XXXX PAPER INTO TRAY<*>.
Printing is not possible if the paper size
setting is different from the size of paper
loaded in the tray. Load the same size of
paper as the paper size setting and then
press the [START] key (
setting is different from the size of paper
loaded in the tray. Load the same size of
paper as the paper size setting and then
press the [START] key (
). Printing will
begin.
("XXXX" indicates paper size. The tray is
indicated in <*>.)
("XXXX" indicates paper size. The tray is
indicated in <*>.)
NO PC COMMUNICATION; CHECK
CABLE.
CABLE.
The machine is not correctly connected
to the computer. Check the cable (when
using the scanner function).
to the computer. Check the cable (when
using the scanner function).
Indication
Cause and remedy
Page
Lamp indicator
Display