Konica Minolta C550 用户手册
Network Settings
4
C550
4-66
Setup LDAP screen 2/6
Setup LDAP screen 3/6
Setup LDAP screen 4/6
Parameter
Description
Server Address
Specify the address of the LDAP server. Use the keyboard that ap-
pears in the touch panel to type in the address (255 characters or
less).
pears in the touch panel to type in the address (255 characters or
less).
Search Base
Specify the search starting point in a hierarchical structure ar-
ranged on the LDAP server. Searches are performed by also in-
cluding the sub-directories lower than the starting point that was
specified.
Use the keyboard that appears in the touch panel to type in the ad-
dress (up to 255 characters).
ranged on the LDAP server. Searches are performed by also in-
cluding the sub-directories lower than the starting point that was
specified.
Use the keyboard that appears in the touch panel to type in the ad-
dress (up to 255 characters).
Parameter
Description
SSL Setting
Select whether or not SSL (data encryption) is used when connect-
ing to an LDAP server.
When SSL is used, communication information is encrypted.
ing to an LDAP server.
When SSL is used, communication information is encrypted.
Port Number
Specify the port number for the LDAP server. To change the set-
ting, press the [C] (clear) key, and then use the keypad to type in
the desired port number. (Range: 1 to 65535)
ting, press the [C] (clear) key, and then use the keypad to type in
the desired port number. (Range: 1 to 65535)
Port Number (SSL)
Specify the port number when SSL is used. To change the setting,
press the [C] (clear) key, and then use the keypad to type in the de-
sired port number. (Range: 1 to 65535)
press the [C] (clear) key, and then use the keypad to type in the de-
sired port number. (Range: 1 to 65535)
Parameter
Description
Authentication Type
Select the authentication method used for logging on to the LDAP
server.
Anonymous: This authentication method does not require a user
name and password. If “Anonymous” is selected, dynamic authen-
tication is disabled.
Simple: This simple authentication method requires a user name
and password. Be careful since the passwords can be leaked over
the network.
Digest-MD5: This authentication method can be used on a typical
LDAP server. If authentication fails using Digest- MD5, the authen-
tication is performed by automatically switching to CRAM-MD5.
GSS-SPNEGO: This authentication method can be used with Ac-
tive Directory in Windows (Kerberos authentication).
NTLM v1 and NTLM v2: These standard user authentication meth-
ods can be used with Windows NT.
They can be used for logging on when sharing files and printers.
server.
Anonymous: This authentication method does not require a user
name and password. If “Anonymous” is selected, dynamic authen-
tication is disabled.
Simple: This simple authentication method requires a user name
and password. Be careful since the passwords can be leaked over
the network.
Digest-MD5: This authentication method can be used on a typical
LDAP server. If authentication fails using Digest- MD5, the authen-
tication is performed by automatically switching to CRAM-MD5.
GSS-SPNEGO: This authentication method can be used with Ac-
tive Directory in Windows (Kerberos authentication).
NTLM v1 and NTLM v2: These standard user authentication meth-
ods can be used with Windows NT.
They can be used for logging on when sharing files and printers.