Konica Minolta C550 用户手册

Network Settings

C550

4-74

Information, such as the SMTP server, that is required to send data as an e-
mail attachment in Scan mode can be specified. In addition, authentication 
settings can be specified for e-mail transmission. Settings can be specified 
for the following.

!

For sending e-mail, administrator address must be specified on this ma-
chine. For details on the administrator address setting, refer to the User’s 
Guide [Copy Operations].

E-Mail TX (SMTP) screen 1/5

E-Mail TX (SMTP) screen 2/5

E-Mail TX (SMTP) screen 3/5

2

It may not be possible to read the e-mail messages if the e-mail software 
used to receive e-mail is not equipped with a restoring function.

Scanning

Select whether or not Scan to E-Mail operations are used.

Status Notification

Select whether or not status notification is used.

Total Counter Notification

Select whether or not total counter notification is used.

SMTP Server Address

Specify the address of the SMTP server used to send e-mail mes-
sages. For details, refer to “SMTP Server Address” on page 4-80.

Binary Division

Specify whether or not a large e-mail message is divided and sent 
in small sections. This is used to send data that has exceeded the 
maximum capacity when the maximum capacity is limited per e-
mail message on the e-mail server.

Divided Mail Size

Specify the size of divided data when dividing the data to be sent. 
To change the setting, press the [C] (clear) key, and then use the 
keypad to type in the desired setting. (Range: 100 to 15000 KB)