Konica Minolta C550 用户手册

Network Settings

C550

4-125

Specify settings for sending notification of the machine’s status by e-mail to 
the administrator. The status notification is sent if a notification destination 
e-mail address is entered and if any of the notification conditions have been 
set to “ON”.

The following notification addresses can be specified.
-

IP address

-

IPX address

-

E-mail address

2

Up to five IP addresses can be specified.

If an IP address or IPX address is to be specified, use the TRAP function 
with SNMP. Set “TRAP Setting” on the SNMP Setting screen to “Allow”.

For details on “SNMP Settings”, refer to “SNMP Settings” on page 4-96.

Settings can be specified for the following.

Touch [5 Network Setting] in the Administrator Settings screen.

–

For details on displaying the Administrator Settings screen, refer to 
“Displaying the Administrator Settings screen” on page 3-7.

Touch [Fwd.

→] in the Network Settings screen, and then touch [5 De-

tail Settings].

Touch [3 Status Notification Setting].

The Status Notification Setting screen appears.

Address

Specify the notification host address.

Port Number

Specify the port number to be used for communication. To change 
the setting, press the [C] (clear) key, and then use the keypad to 
type in the desired port number. (Range: 1 to 65535)

Community Name

Type in the community name (15 characters or less).

Notification Item

Specify the conditions when notification of the machine’s status is 
sent. For details, refer to “Notification Item” on page 4-132.