Polycom 5.3 用户手册

 

Conference Management Operations

Polycom, Inc. 

27

 

Edit a Room’s Settings

You can edit a room’s call settings for future scheduled conferences. The 

changes apply only to the selected conference.

To edit a room’s settings

1

Go to Conference > Future. 

2

To delete a past conference, select the appropriate filter (such as 

Yesterday Plus).

3

Select the conference of interest and click Edit

.

4

If you select a recurring conference, a dialog box appears asking if you 

want to edit all conferences in the series or just the selected one. Make the 

appropriate choice and click Edit.

5

In the conference scheduling page, select the room of interest from the 

Selected Participants and Rooms list and click Edit.

6

In the Edit Room Settings dialog box, edit the room settings as required. 

a

Select the room’s endpoint, if the room has more than one available.

b

For a room with an audio endpoint, set Dial Type to IP or ISDN as 

required.

c

For a room with a video endpoint:

Set the Bit Rate, Dial Options, and Dial Type as required. You 

can change the connection speed for an endpoint up to the 

maximum speed specified by the conference template.

If you select Dial Out and a Dial Type of IP, enter the room’s 

phone Number.

If you select Dial Out and a Dial Type of ISDN and the system 

must use a specific dialing prefix to call the room, select Use 

Modified Dial Number and enter the room’s complete phone 

number including prefix, country code, area or city code, and 

phone number.

If you select Dial Out and a Dial Type of ISDN and the system 

does not need to use a specific dialing prefix to call the room, 

select the appropriate Country and enter the room’s Area/City 

Code and phone Number.

7

Click OK.

Not all of these settings are applicable to all endpoint types, so some selections 
may be grayed out. See your endpoint documentation to understand supported 
settings.