Wasp Bar Code WLS 8400 FZ 用户手册
Symbologies
8-51
Set Lengths for MSI (continued)
Two Discrete Lengths - This option allows the scanner to decode only those MSI
symbols containing either of two selected lengths. Lengths are selected from the numeric
bar codes beginning on page
symbols containing either of two selected lengths. Lengths are selected from the numeric
bar codes beginning on page
. For example, to
decode only those MSI symbols containing either 2 or 14 characters, select MSI - Two
Discrete Lengths, then scan 0, 2, 1, and then 4. In case of an error, or to change the
selection, scan Cancel on page
Discrete Lengths, then scan 0, 2, 1, and then 4. In case of an error, or to change the
selection, scan Cancel on page
MSI - Two Discrete Lengths
Length Within Range - This option allows the scanner to decode an MSI symbol
with a specific length range. The length range is selected from numeric bar codes
beginning on page
with a specific length range. The length range is selected from numeric bar codes
beginning on page
For example, to decode MSI
symbols containing between 4 and 12 characters, first scan MSI - Length Within Range.
Then scan 0, 4, 1, and 2 (single digit numbers must always be preceded by a leading zero).
In case of an error, or to change the selection, scan Cancel on page
Then scan 0, 4, 1, and 2 (single digit numbers must always be preceded by a leading zero).
In case of an error, or to change the selection, scan Cancel on page
MSI - Length Within Range