Wasp Bar Code WLS 8400 FZ 用户手册
WLS 8400 Product Reference Guide
3-6
If after performing these checks the symbol still does not decode,
contact the distributor or call Wasp Support. See page xvii for the
telephone number.
contact the distributor or call Wasp Support. See page xvii for the
telephone number.
Scanner emits a short low/short
medium/short high beep sequence
after changing USB host type.
medium/short high beep sequence
after changing USB host type.
The USB bus re-establishes power
to the scanner.
to the scanner.
Normal when the USB host type is
changed.
changed.
Scanner emits 1 short high beep
when it is not in use.
when it is not in use.
In RS-232 mode, a <BEL>
character is received and Beep on
<BEL> option is enabled.
character is received and Beep on
<BEL> option is enabled.
Normal when Beep on <BEL> is
enabled and the scanner is in RS-
232 mode.
enabled and the scanner is in RS-
232 mode.
Table 3-1. Troubleshooting (Continued)
Problem
Possible Causes
Possible Solutions