Cisco Systems CSACS1121UPK9 用户手册
C H A P T E R
5-1
Installation and Upgrade Guide for the Cisco Secure Access Control System 5.2
OL-21574-01
5
Installing and Configuring the Cisco Secure
Access Control System with CSACS-1121
Access Control System with CSACS-1121
This chapter describes how to install and initially configure CSACS-1121 and the ACS 5.2 server.
This chapter contains:
•
•
•
•
•
Installation Using the CSACS-1121 Series Appliance
The CSACS-1121 appliance is preinstalled with the ACS 5.2 software. This section gives you an
overview of the installation process and the tasks that you must perform before installing ACS.
overview of the installation process and the tasks that you must perform before installing ACS.
Before you begin installing ACS 5.2, you must:
1.
Open the box and check the contents. See
2.
Read
3.
Read the general precautions and safety warnings in
4.
Install the appliance in the rack. See
5.
Connect the CSACS-1121 to the network and appliance console. See
6.
Power up the CSACS-1121 appliance. See
7.
Run the setup command at the CLI prompt to configure the initial settings for the ACS server. See
.