Motorola T1/E1 用户手册

Canopy  T1/E1 Multiplexer 

 

 

 

 

 

 

September 2004 

 

 

 

 

 

 

     

      T1/E1 Multiplexer FPGA Version 3.4 

 
 

 

Page 49 of 73 

Follow these steps to configure line coding for the Canopy T1/E1 Multiplexer from the 
EMS. 

 
NOTE: Selecting either T1 or E1 will configure all 4 channels. 

1.  From main menu EMS, select the Configuration (Config) option.  

2. Select 

Configure Line Type. 

RESULT: The Line Config dialogue box opens. 

3. Click 

↓. 

RESULT: The dropdown list to specify the coding technique T1 channel opens. 

4.  Click on the appropriate line coding technique for the T1channel being 

configured.  

5.  Click on the tab for the next Channel to configure line coding for channel. 

6.  To configure the line coding technique for each channel, repeat Steps 3 and 4.  

7.  When all channels are configured, select the File

→Reset menu option.  

RESULT: A confirmation window pops up.   

8.  To reset the system, select Yes. 

9. Select 

Close.  

RESULT: The dialogue box closes and you are returned to the EMS main menu.  

Follow these steps to configure T1 line coding from the EMS. 

1.  From main menu EMS, select the Configuration (Config) option.  

2. Select 

Configure T1. 

RESULT: The  Config dialogue box opens. 

3. Click 

↓. 

RESULT: The dropdown list to specify the coding technique T1 channel opens. 

4.  Click on the appropriate line coding technique for the T1channel being 

configured. 
NOTE: You must select a coding technique: either B8ZS or AMI. 

5.  Click on the tab for the next Channel to configure line coding for channel. 

NOTE: If the system has been reset, clicking the Refresh button will replace the 
displayed values with currently-programmed values. 

6.  To configure the line coding technique for each other channel, repeat Steps 3 

and 4.  

7. Select 

Close to close the dialogue box once all channels are configured.  

RESULT: You are returned to the EMS main menu.  

Issue 3