Alloy Computer Products GSM-24T2SFP 用户手册
GSM Series User Manual
75
Alloy Computer Products Pty Ltd Copyright ©2006
Join
Time:
Used to specify the Join Time in units of 100
th
of a Second, Valid time range is 20
– 100.
Default: 20
Leave
Time:
Used to specify the Leave Time in units of 100
th
of a Second, Valid time range is
60 – 300.
Default: 60
Leave
All
Time:
A time period for the announcement that all registered devices are going to be
de-registered. If a device issues a new join command, then a registration will be
kept in the switch. Valid range is 1000 – 5000 unit time.
de-registered. If a device issues a new join command, then a registration will be
kept in the switch. Valid range is 1000 – 5000 unit time.
Default: 1000 unit time
Default
Applicant
Mode:
There are two types of participant modes that are supported, normal participant
and non-participant.
and non-participant.
Normal:
The switch participates normally in the GARP protocol exchanges. This is the
default setting.
default setting.
Non-Participant:
In this mode the switch does not send or reply to any GARP messages, it just
listens to messages and reacts to any received GVRP BPDU.
listens to messages and reacts to any received GVRP BPDU.
Default Registrar Mode:
There are three types of administrative control values that can be set, they are
normal registrar, fixed registrar and forbidden registrar.
normal registrar, fixed registrar and forbidden registrar.
Normal:
The Registrar responds normally to incoming GARP messages. This is the
default setting.
default setting.
Fixed:
The Registrar ignores all GARP messages and all members remain in the
registered (IN) state.
registered (IN) state.
Forbidden:
The Registrar ignores all GARP messages and all members remain in the
unregistered (EMPTY) state.
unregistered (EMPTY) state.
Restricted Mode:
This function is used to restrict the creation of a dynamic VLAN when this port
receives GVRP BDU. There are two modes Enabled and Disabled.
receives GVRP BDU. There are two modes Enabled and Disabled.
Disabled:
The dynamic VLAN will be created when this port receives a GVRP BDU. This is
the default setting.
the default setting.