Sony 8000SF 用户手册
445
Basic Procedure for Wipe Settings
Chapt
2
Press [Split], turning it on.
3
Set the following parameters.
Modifying the wipe pattern edge
1
In the M/E-1 >Wipe menu, select HF4 ‘Edge/Direction.’
The Edge/Direction menu appears.
2
In the <Edge> group, select the edge type.
Border: border
Soft: soft edge
Soft Border: soft border
Soft: soft edge
Soft Border: soft border
For an overview of the edge types, see “Edge” (page 65).
3
Set the parameters according to the selection in step 2.
• When border is selected
• When soft edge is selected
• When soft border is selected
4
When you selected border or soft border, select the edge fill signal in the
<Edge Fill> group.
<Edge Fill> group.
Utility 2 Bus: signal selected on the utility 2 bus
Matte: signal from the dedicated color matte generator
Matte: signal from the dedicated color matte generator
Knob
Parameter
Adjustment
Setting values
1
Split No
Number of splits
1 to 4 (integer)
2
Spacing
Spacing between adjacent
patterns
patterns
0.00 to 100.00
Knob
Parameter
Adjustment
Setting values
1
Width
Border width
0.00 to 100.00
Knob
Parameter
Adjustment
Setting values
1
Soft
Edge softness
0.00 to 100.00
Knob
Parameter
Adjustment
Setting values
1
Width
Border width
0.00 to 100.00
2
Inner Soft
Border inner softness
0.00 to 100.00
3
Outer Soft
Border outer softness
0.00 to 100.00