3com NJ240FX 用户指南

Once you have installed the NJ240FX hardware on your network and the Local 
Configuration Manager software on your computer, you need to perform an 
initial configuration of the IntelliJack.

1 The first step is to connect your computer to the NJ240FX that you are installing. 

Attach an Ethernet cable  from a computer running the Local Configuration 
Manager software to any one of the four personal area network (PAN) ports on 
the front of the NJ240FX.

2 Click on the desktop shortcut icon labeled IJ Local Config Mgr to start the 

program. When it launches, you will see a window like this:

3 Select the type of IntelliJack switch you would like to manage.

4 Enter the password for the device. The default password is “password” (without 

the quotes). You will have the opportunity to specify a new password from within 
this application. 

5 Select the transport mode you are using to communicate on your network. The 

IPv6 option will only be enabled if your operating system supports IPv6. 
(IntelliJacks prior to NJ240FX do not support IPv6.) The Interface number 
corresponds to the network interface in the computer running the LCM