Rose electronic 2xE 用户手册

 

Selecting option 6 restores the CPU card to its original factory 
configuration. The following message appears: 
 
 
When the factory defaults have been restored, the following message 
is displayed: 
 
 
The serial options menu is then displayed, indicating that this CPU 
board has been reset to the factory defaults.  
 
Option 7. Save Changes 
This option saves the configuration changes made in option 1 and 2 
only to the CPU card where the serial cable is attached. It is 
recommended that all users be logged off from all systems prior to 
saving any configuration changes. 
 
To save the configuration changes, press 7, and the following message 
appears: 
 
 
 
When the flash memory is updated, the following message is 
displayed: 
 
 
 
Option 8. Exit (Restart the Unit) 
Selecting option 8 exits the serial option menu. The UltraMatrix switch 
will reinitialize and the diagnostic check will run. After the diagnostic 
check finished, the Unit is ready to use with its new configurations.  If 
there are more configurations needed, hit the space bar within 5 
seconds and the serial menu will be brought back up to use. 
 
 
 
 
 
 
 
 
 
 
 
 
 

Flash programming . . . . . . . . . . . . . . . . . . . .  

Reset to default successful 

Flash programming . . . . . . . . . . . . . . . . . . .  

Configuration saved successfully