Raritan Engineering KX2-832 用户手册

Chapter 7: Device Management 
 

ƒ Port 

Type 

 

DCIM Dominion 

CIM 

Not Available 

No CIM connected 

PCIM Paragon 

CIM 

PowerStrip Power 

CIM 

VM 

Virtual Media CIM (D2CIM-VUSB and 
D2CIM-DVUSB)  

Blade Chassis 

Blade chassis and the blades associated 
with that chassis (displayed in a 
hierarchical order) 

2.  Click the Port Name for the port you want to edit. 

ƒ  For KVM ports, the Port page is opened. From this page, you can 

name the ports and create power associations. 

ƒ  For power strips, the Port page for power strips is opened. From 

this page, you can name the power strips and their outlets. name 
the power strips and their outlets. 

 

 

1.  Connect all of the target servers if you have not already done so. 

See 

 (on page 25) for a description 

of connecting the equipment. 

2.  Choose Device Settings > Port Configuration. The Port Configuration 

page opens. 

3.  Click the Port Name of the target server you want to rename. The 

Port Page opens. 

4.  Assign a name to identify the server connected to that port. The 

name can be up to 32 characters, and alphanumeric and special 
characters are allowed. 

5. Click 

OK. 

 

The Dominion KX II allows you to connect powerstrips to Dominion KX II 
ports and configure the powerstrips from the Port page. Note that this is 
different then configuring PX powerstrip outlets. For information on 
configuring PX powerstrip outlets, see 

 (on 

page 174).