Raritan Engineering KX2-832 用户手册

 

Chapter 7: Device Management 

 

e.  The Username Field and Password Field, which are both 

optional, contain the labels that are expected to be associated 
with the username and password entries. It is in these fields you 
should enter the field names for the username and password 
fields used on the login screen for the web application. You can 
view the HTML source of the login screen to find the field names, 
not the field labels. See 

 (on page 157) for tips on adding a web browser 

interface. 

5.  USB profiles do not apply to Dell chassis. 

6.  Click OK to save the configuration. 

 

See 

 (on page 160), 

 (on page 161), and 

 (on page 163) for 

important, additional information when configuring the blade chassis. 

1.  Connect the blade chassis to the Dominion KX II. See 

 (on page 25) for details. 

2.  Select Device Settings > Port Configuration to open the Port 

Configuration page.   

3.  On the Port Configuration page, click on the name of the blade 

chassis you want to configure. The Port page will open. 

4.  Select the Blade Chassis radio button. The page will then display the 

necessary fields to configure a blade chassis. 

5.  Select the IBM blade chassis model from the Blade Server Chassis 

Model drop-down. 

 

1.  If you selected IBM BladeCenter H or E, auto-discovery is available. 

Configure the blade chassis as applicable. Prior to configuring a 
blade chassis that can be auto-discovered, it must be configured to 
enable SSH connections on the designated port number (see 

 (on page 125)). Additionally, a user account with the 

corresponding authentication credentials must be previously created 
on the blade chassis. 

a.  Switch Hot Key Sequence - Predefined. 

b.  Maximum Number of Slots - The default maximum number of 

slots available on the blade chassis is automatically entered. 

c.  Administrative Module Primary IP Address/Host Name - Enter 

the primary IP address for the blade chassis. Required for 
auto-discovery mode