Raritan Engineering KX2-832 用户手册
Chapter 10: Maintenance
197
3. Click the Upgrade button. You are prompted to confirm the upgrade.
4. Click OK to continue the upgrade. Progress bars are displayed
during the upgrade. Upgrading takes approximately 2 minutes or less
per CIM.
per CIM.
Upgrading Firmware
Use the Firmware Upgrade page to upgrade the firmware for your
Dominion KX II and all attached CIMs. This page is available in the
Dominion KX II Remote Console only.
Dominion KX II and all attached CIMs. This page is available in the
Dominion KX II Remote Console only.
Important: Do not turn off your Dominion KX II unit or disconnect
CIMs while the upgrade is in progress - doing so will likely result in
damage to the unit or CIMs.
CIMs while the upgrade is in progress - doing so will likely result in
damage to the unit or CIMs.
To upgrade your Dominion KX II unit:
1. Locate the appropriate Raritan firmware distribution file (*.RFP) on
the
Raritan website
http://www.raritan.com on the Firmware
Upgrades web page.
2. Unzip the file. Please read all instructions included in the firmware
ZIP files carefully before upgrading.
Note: Copy the firmware update file to a local PC before uploading.
Do not load the file from a network drive.
Do not load the file from a network drive.
3. Choose Maintenance > Firmware Upgrade. The Firmware Upgrade
page opens.
4. Click the Browse button to navigate to the directory where you
unzipped the upgrade file.
5. Select the Review CIM Version Information? checkbox if you would
like information displayed about the versions of the CIMs in use.