Raritan Engineering KX2-832 用户手册
Chapter 2: Installation and Configuration
24
4. Use the sliders to set the Mouse acceleration to 1.0 and Threshold to
1.0.
5. Click
OK.
To configure the video:
1. From the Launcher, select Application Manager.
2. Select
System_Admin.
3. Choose Smit > Devices > Graphic Displays > Select the Display
Resolution and Refresh Rate.
4. Select the video card in use.
5. Click List. A list of display modes is presented.
6. Select a resolution and refresh rate supported by the Dominion KX II.
See
Supported Video Resolutions
(on page 246) for more
information.
Note: If you change the video resolution, you must log out of the target
server and log back in for the video settings to take effect.
server and log back in for the video settings to take effect.
Make UNIX Settings Permanent
Note: These steps may vary slightly depending on the type of UNIX® (for
example, Solaris, IBM AIX) and the specific version in use.
example, Solaris, IBM AIX) and the specific version in use.
1. Choose Style Manager > Startup. The Style Manager - Startup
dialog appears.
2. On the Logout Confirmation dialog, select the On option. This option
prompts you to save your current session when you log out.
Apple Macintosh® Settings
For KVM target servers running an Apple Macintosh operating system,
the preferred method is to use the D2CIM-VUSB and Absolute Mouse
Synchronization.
the preferred method is to use the D2CIM-VUSB and Absolute Mouse
Synchronization.
Note: 'USB Profile 'Mac OS-X, version 10.4.9 and later' must be select
from the USB Profile menu or the Port Configuration page.
from the USB Profile menu or the Port Configuration page.
Step 2: Configure Network Firewall Settings
To access Dominion KX II through a network firewall via Multi-Platform
Client or through the Port Access page, your firewall must allow
communication on TCP Port 5000 or another port that you designate.
Client or through the Port Access page, your firewall must allow
communication on TCP Port 5000 or another port that you designate.