Q-Logic 5802V 用户手册
11 – Event Log Configuration
Displaying the Event Log
59263-01 A
11-3
A
The following is an example of the Show Log command:
SANbox #> show log
[327][day month date time year][I][Eport Port:0/8][Eport State=
E_A0_GET_DOMAIN_ID]
[328][day month date time year][I][Eport Port: 0/8][FSPF PortUp state=0]
[329][day month date time year][I][Eport Port: 0/8][Sending init hello]
[330][day month date time year][I][Eport Port: 0/8][Processing EFP, oxid= 0x8]
[331][day month date time year][I][Eport Port: 0/8][Eport State = E_A2_IDLE]
[332][day month date time year][I][Eport Port: 0/8][EFP,WWN= 0x100000c0dd00b845,
len= 0x30]
[333][day month date time year][I][Eport Port: 0/8][Sending LSU oxid=0xc:type=1]
[334][day month date time year][I][Eport Port: 0/8][Send Zone Merge Request]
[335][day month date time year][I][Eport Port: 0/8][LSDB Xchg timer set]
You can also filter the event log display with the Show Log Display command and
customize the messages that display automatically in the output stream.
customize the messages that display automatically in the output stream.
Filtering the Event Log Display
You can customize what events are displayed according to the component or
severity level. Enter the
severity level. Enter the
Display command to filter the events in the
display. You can choose from the following severity levels and component events:
Informative events
Warning events
Critical events
E_Port events
Management server events
Name server events
Port events
Switch management events
Simple Network Management Protocol (SNMP) events
Zoning events
The following example filters the event log display for critical events.
SANbox #> show log display critical