Cabletron Systems STHI 用户手册
The SNMP Community Names Screen
Page 5-11
Retry Interval
2
The Retry Interval field determines the duration between automatic retries
of RI/RO ports disabled by ABRP. Intervals are selectable to a resolution
of 7 seconds between ring port retry attempts. The default setting is 21.
of RI/RO ports disabled by ABRP. Intervals are selectable to a resolution
of 7 seconds between ring port retry attempts. The default setting is 21.
5.3.6
MAC Address
This read-only field displays the Media Access Control (MAC) address
which, by universal default, identifies the hub at the network’s physical
layer.
which, by universal default, identifies the hub at the network’s physical
layer.
5.3.7
Locally Administered Address
Users may assign a locally administered address which is used instead of
the MAC address to identify the FNB interface at the network’s physical
layer. If enabled, the locally administered address takes effect after the
next reset of the STHI.
the MAC address to identify the FNB interface at the network’s physical
layer. If enabled, the locally administered address takes effect after the
next reset of the STHI.
5.4 The SNMP Community Names Screen
Access the SNMP Community Names screen, shown in Figure 5-5, from
the Device Setup menu.
the Device Setup menu.
Figure 5-5. Community Name Table Screen
STHI LOCAL MANAGEMENT Flash Image Version: 1.00.00
SNMP COMMUNITY NAMES
Component Name Community Name Access
STHI Chassis MGR
public
READ-ONLY
STHI Chassis MGR
public
READ-WRITE
STHI Chassis MGR
public
SUPER-USER
SAVE RETURN