Cabletron Systems BRIM-T6 用户手册
MEDIA SPECIFICATIONS AND REQUIREMENTS
B-2
B.2 SHIELDED TWISTED PAIR (STP)
STP cable categories are listed as follows:
•
IBM Type 1 consists of two STP lengths of 22 AWG solid wire for
data. There are three versions of Type 1: Indoor, Outdoor, and Plenum.
It is typically used for the longest cable runs within the walls of
buildings.
data. There are three versions of Type 1: Indoor, Outdoor, and Plenum.
It is typically used for the longest cable runs within the walls of
buildings.
•
IBM Type 2 is similar to Type 1 data cable, but has four additional
UTP lengths of 22 AWG solid wire carried outside of the shield casing.
There are two versions of Type 2: Plenum and Outdoor. It is typically
used for voice communication and often used to wire cable runs within
the walls of buildings.
UTP lengths of 22 AWG solid wire carried outside of the shield casing.
There are two versions of Type 2: Plenum and Outdoor. It is typically
used for voice communication and often used to wire cable runs within
the walls of buildings.
•
IBM Type 6 consists of two STP lengths of 26 AWG stranded wire for
data. Used in patch panels or to connect devices to/from wall jacks.
Attenuation for Type 6 cable is 150% of Type 1 cable (e.g., 66 m of
Type 6 =100 meters of Type 1).
data. Used in patch panels or to connect devices to/from wall jacks.
Attenuation for Type 6 cable is 150% of Type 1 cable (e.g., 66 m of
Type 6 =100 meters of Type 1).
•
IBM Type 9 is similar to Type 1, but uses 26 AWG solid wire.
Attenuation for Type 9 cable is 150% of Type 1 cable (e.g., 66 m of
Type 9 = 100 meters of Type 1).
Attenuation for Type 9 cable is 150% of Type 1 cable (e.g., 66 m of
Type 9 = 100 meters of Type 1).
Impedance and Attentuation
The attenuation values shown Table B-2 include the attenuation of the
cables, connectors, patch panels, and reflection losses due to impedance
mismatches in the segment.
cables, connectors, patch panels, and reflection losses due to impedance
mismatches in the segment.
Table B-2. STP Cable Specifications
Type
Freq.
Impedance
Attenuation
1 & 2
4 MHz
16 MHz
16 MHz
150
Ω
+ 15%
150
Ω
+ 15%
<22 dB/km (6.7 db/1000 ft.)
<45 dB/km (13.7 db/1000 ft.)
<45 dB/km (13.7 db/1000 ft.)
6 & 9
4 MHz
16 MHz
16 MHz
150
Ω
+ 15%
150
Ω
+ 15%
<33 dB/km (10 db/1000 ft.)
<66 dB/km (20 db/1000 ft.)