Intelligent Motion Systems ISP300 产品宣传页

REV101805

��

�

��

��

COMPACT HIGH OUTPUT

SWITCH MODE POWER SUPPLY

COMPACT HIGH OUTPUT

SWITCH MODE POWER SUPPLY

THERMAL SPECIFICATIONS

Operating Temperature......... 0 to 50° C

Storage Temperature ......– 40 to 125° C

Max Heat Sink Temperature ......... 70° C

FEATURES

•  Compact Size
•  Efficient Switch Mode Design
•  High Output Power (240 Watts)
•  Specifically Designed to Power

Motor Drivers

• Short Circuit and Thermal

Protection

• Wide Input Voltage Range

(

–

15%, +10%)

• 120 VAC and 240 VAC Versions

(50/60Hz)

•  Power and Fault LEDs
•  Short Circuit and Over Voltage
•  Temperature Protection

  ISP300-4   ISP300-7
AC Input Voltage, 120 VAC Version  ... 102–132 VAC     102–132 VAC
   240 VAC Version .... 204–264 VAC    204–264 VAC
Input Frequency............................... 50/60 Hz     50/60 Hz
No Load Output Voltage* .................. 42 VDC @ 0 Amps     68 VDC @ 0 Amps
Continuous Output Rating*................ 39 VDC @ 3 Amps     63 VDC @ 2 Amp
Peak Output Rating* ........................ 37 VDC @ 6 Amps     59 VDC @ 4 Amps

*Measurements taken @ 25º C, 120 VAC, 60 Hz

OPTIONS

ISP300H (-4 or -7)............................................................240 VAC Input

U3-CLP ................................................................ Side Mounting Clip Set

DESCRIPTION

The ISP300 switch mode power sup-

ply has been designed specifically for

supplying power to the inductive loads

found in stepping and DC motors. Con-

ventional switching power supplies are

designed for the constant, unvarying

loads of circuit boards and are not tol-

erant of the current surges produced

by rapid changes in power demand and

the inductance of motor coils.

This supply is capable of delivering

6 Amps (-4), 4 Amps (-7) of peak

current and has the ability to absorb

inductive current surges associated

with stepping and DC motors. This

produces more even output power

which enables motors to operate at

higher performance levels.

The ISP300 is well protected with de-

signed-in short circuit and over voltage

temperature protection circuits. The

protection circuits, along with LEDs for

fault and power, are provided to aid in

troubleshooting.

The lightweight, compact packaging of

the ISP300 permits easy integration of

the power supply into OEM equipment.

MECHANICAL SPECIFICATIONS

Dimensions in Inches (mm)

ELECTRICAL SPECIFICATIONS