Toshiba PRO L300D 用户手册
User’s Manual
7-3
HW Setup and Passwords
3. Click the OK button. If the character string you enter matches the reg-
istered password, the password option is reset and the display
changes to:
changes to:
Not registered
If they do not match, the following message appears. You must repeat
step 1.
step 1.
Incorrect Password!!!
4. Follow the same procedures described in the earlier section, How to
set the password, to set a new user password.
Display
This tab lets you customize your computer’s display settings for either the
internal LCD screen or for an external monitor.
internal LCD screen or for an external monitor.
Power On Display
Lets you set the display to be used when the computer is booted.
CPU
Dynamic CPU Frequency Mode
This option lets you choose from the following settings:
If you enter the password incorrectly three times in a row, the computer
need to shut off.
need to shut off.
You will not be able to access the password option in the HW Setup. In this
case you must turn the power off and back on to retry the procedure.
case you must turn the power off and back on to retry the procedure.
Auto-Selected
Selects an external monitor if one is connected,
otherwise, it selects the internal LCD display
(Default).
otherwise, it selects the internal LCD display
(Default).
LCD + Analog RGB
Selects both the internal LCD and an external
monitor for simultaneous display.
monitor for simultaneous display.
Dynamically
Switchable
Switchable
CPU power consumption and clock speed
automatic switching function is enabled. When
the computer is in use, CPU operation is
automatically switched when necessary.
(Default)
automatic switching function is enabled. When
the computer is in use, CPU operation is
automatically switched when necessary.
(Default)
Always Low
CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at low power consumption and
low speed.
automatic switching function is disabled. The
CPU always runs at low power consumption and
low speed.