Toshiba PRO L300D 用户手册
User’s Manual
4-26
Operating Basics
■
11a, 11b, 11g and 11n wireless are based on IEEE 802.11a, 802.11b,
802.11g and 802.11n respectively. The IEEE 802.11n specification has
not been finalized and is currently in draft release. The TOSHIBA
11a/b/g/n Wireless LAN Adaptors are based on the draft release,
version 2.0, of the IEEE 802.11n specification. An adaptor with 11a/b,
11a/b/g or 11a/b/g/n can communicate on any of its supported formats;
the actual connection will be based on the access point to which it
connects.
802.11g and 802.11n respectively. The IEEE 802.11n specification has
not been finalized and is currently in draft release. The TOSHIBA
11a/b/g/n Wireless LAN Adaptors are based on the draft release,
version 2.0, of the IEEE 802.11n specification. An adaptor with 11a/b,
11a/b/g or 11a/b/g/n can communicate on any of its supported formats;
the actual connection will be based on the access point to which it
connects.
■
Connection compatibility with the wireless equipment in draft 11n mode
is not guaranteed.
is not guaranteed.
■
The draft 11n function cannot be used with WEP/TKIP. draft 11n mode
can be used only with WPA-PSK(AES) mode or no security mode.
can be used only with WPA-PSK(AES) mode or no security mode.
Security
■
Be sure to enable encryption function. Otherwise your computer will
allow the illegal access by outsider through wireless LAN to cause
illegal instruction, eavesdropping, and loss or destruction of stored data.
TOSHIBA strongly recommends the customer to enable the encryption
function.
allow the illegal access by outsider through wireless LAN to cause
illegal instruction, eavesdropping, and loss or destruction of stored data.
TOSHIBA strongly recommends the customer to enable the encryption
function.
■
TOSHIBA is not liable for the eavesdropping of data due to the use of
Wireless LAN and the damage thereof.
Wireless LAN and the damage thereof.
Wireless communication switch
You can enable or disable RF transmission(Wireless LAN) functions on and
off, with this switch (Provided with some models). No transmissions are
sent or received when the switch is off. Slide the switch toward the right of
the computer to turn it on and toward the left of the computer to turn it off.
off, with this switch (Provided with some models). No transmissions are
sent or received when the switch is off. Slide the switch toward the right of
the computer to turn it on and toward the left of the computer to turn it off.
Turn the computer off when you enter an airplane and check the carrier’s
regulations before you use a computer on board.
regulations before you use a computer on board.
Wireless communication Indicator
The wireless communication indicator indicates the status of the wireless
communication functions.
Set the switch to off in airplanes and hospitals. Check the indicator. It will
stop glowing when the wireless communication function is off.
stop glowing when the wireless communication function is off.
Indicator status
Indication
Indicator off
Wireless communication switch is set to off.
Automatic power down because of overheating.
Power malfunction
Automatic power down because of overheating.
Power malfunction
Indicator glows
Wireless communication switch is on.
Wireless LAN is turned on by an application.
Wireless LAN is turned on by an application.