Toshiba ProT1!0 用户手册

The following describes the procedure for removing the LCD unit (See Figure 4-14-1 to 4-
14-4). 

1. Remove Screw MYLAR cover x4 

2. Remove the following screws securing the display mask 

  M2.04.0F         FLAT BIND screw         x4 

3. Insert your finger between the edge of the display mask and the LCD, and remove the 
display mask while releasing the latches of display mask. (Note: when removing the 
display mask, please first remove from top side to the bottom in order to lessen the 
degree of breaking. 

 

 

4. Remove the following screws securing the LCD unit, and disconnect CCD FPC 

  M2.03.0F        FLAT BIND screw         x4