Zebra Technologies 105SL Plus 用户手册

Troubleshooting
Error Messages

P1056468-002  

7/3/13

The printer stops; the 
ERROR light is on; the 
printer cycles through these 
three messages.

An improperly connected printhead data or power cable 

can cause these error messages. The printhead may be hot 
enough to cause severe burns. Allow the printhead to cool.

The printhead data cable is not 
properly connected.

Turn off (

) the printer 

before performing this procedure. 
Failure to do so can damage the 
printhead.

Turn off (O) the printer.

Disconnect and reconnect the data 
cable to the printhead.

Ensure that the cable connector is 
fully inserted into the printhead 
connector.

Turn on (I) the printer.

The printhead has a faulty 
thermistor.

Call a service technician.

The printer stops.

The printer is defragmenting 
memory.

Do NOT turn off the printer 

power during defragmenting. Doing so 
can damage the printer.

Allow the printer to finish 
defragmenting. If you get this error 
message frequently, check your label 
formats. Formats that write to and erase 
memory frequently may cause the 
printer to defragment often. Using 
properly coded label formats usually 
minimizes the need for defragmenting.

If this error message does not go away, 
contact Technical Support. The printer 
requires service.