National Instruments MXI 用户手册

© National Instruments Corporation

This chapter explains how to install the MXI-Express hardware.

The following are general instructions for installing the MXI-Express 
cards. Consult your computer user manual or technical reference manual 
for specific instructions and warnings.

The PXI Platform Services software on the PXI Platform Services CD or driver CD 

included with your PXI Express MXI-Express hardware is required to provide chassis and 
controller identification for PXI features such as trigger routing and slot detection. The PXI 
Platform Services software is also included with the NI-DAQmx and NI-VISA drivers. For 
more information, refer to KnowledgeBase 3TJDONDS at 

ni.com

.

1.

Power off your computer, but leave it plugged in while installing the 
NI PCIe-8361/8362. The power cord grounds the computer and 
protects it from electrical damage while you install the card.

To protect both yourself and the computer from electrical hazards, your computer 

should remain off until you finish installing the NI PCIe-8361/8362.

2.

Remove the top cover or access port to the PCI Express bus.

3.

Select any available PCI Express expansion slot (x1 or wider).

The BIOS or motherboard may not support the NI PCIe-8361/8362 in a slot intended 

for a graphics card.

4.

Locate the metal bracket that covers the cut-out in the back panel of the 
computer for the slot you have selected. Remove and save the 
bracket-retaining screw and the bracket cover.

5.

Touch the metal part of the power supply case inside the computer to 
discharge any static electricity that might be on your clothes or body.