Zebra Technologies 105SLTM 用户手册

Control Panel

6/30/06

105SL User Guide

11342L-001 Rev. A

 describes lights on the control panel that indicate different printer conditions.

MINUS

Changes the parameter values. Common uses are to decrease a value, to 
answer “no,” to scroll through choices, or to change the cursor position 
while entering the password.

PLUS

Changes the parameter values. Common uses are to increase a value, to 
answer “yes,” to scroll through choices, or to change values while entering 
the password.

If two operating conditions occur simultaneously (for example, one that causes a light 

to be on constantly and one that causes the same light to flash), the light flashes.

POWER

Off

The printer is off or power is not applied.

On

The printer is on.

TAKE 
LABEL

Off

Normal operation.

Flashing

(Peel mode only.) The label is available. Printing pauses 
until the label is removed.

ERROR

Off

Normal operation—no printer errors.

Flashing

A printer error exists. Check the LCD for more information.

CHECK 
RIBBON

Off

Normal operation—ribbon (if used) is properly loaded.

On

Printing pauses, the LCD displays a warning message, and 
the PAUSE light is on.

• If the printer is in Direct Thermal Mode: ribbon is loaded.

• If the printer is in Thermal Transfer Mode: no ribbon is 

loaded, or ribbon is loaded incorrectly.

PAPER OUT

Off

Normal operation—media is properly loaded.

On

No media is under the media sensor. Printing pauses, the 
LCD shows an error message, and the PAUSE light is on.

PAUSE 
(located above 
the 

PAUSE

 

button)

Off

Normal operation.

On

The printer stopped all printing operations. Causes include:

•

PAUSE

 was pressed

• A label format included a pause command

• A printer error was detected. 

The LCD gives additional information.