OKI C610 用户手册

Auto Density 
Mode

On/Off

Selects whether density 
adjustment and TRC 
compensation is automatically 
performed.
On: Density adjustment is 
automatically run under the 
engine-specified conditions, and 
reflected in TRC compensation.
Off: The printer does not 
voluntarily run density 
adjustment.

Adjust Density

Execute

If Execute is selected, the printer 
will immediately adjust density 
and reflect it in TRC 
compensation.
This adjustment must be 
executed when the printer is 
idling. It can become invalid 
if executed in any other state.

Adjust 
Registration

Execute

When this menu is selected, the 
printer performs AutoAdjust 
Registration.
This adjustment must be 
executed when the printer is 
idling. 

Print Tuning 
Pattern

Execute

Prints the pattern for the user to 
adjust TRC. Ordinarily, this 
function is not needed because 
TRC is automatically adjusted to 
the recommended levels through 
density adjustment and TRC 
compensation.
Adjustment results will be 
reflected as offset values 
(addition) to the corrections 
through the Adjust Density/TRC 
Compensation function.