Lexmark 19Z0100 用户手册
Setting the outgoing fax name and number
To have the designated fax name and fax number printed on outgoing faxes:
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the address
in the TCP/IP section.
in the TCP/IP section.
2
Click Settings.
3
Click Fax Settings.
4
Click Analog Fax Setup.
5
Click General Fax Settings.
6
Click inside the Station Name box, and then enter the name to be printed on all outgoing faxes.
7
Click inside the Station Number box, and then enter the printer fax number.
8
Click Submit.
Setting the date and time
You can set the date and time so that they are printed on every fax you send. If there is a power failure, you may have
to reset the date and time.
to reset the date and time.
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the address
in the TCP/IP section.
in the TCP/IP section.
2
Click Settings.
3
Click Security.
4
Click Set Date and Time.
5
Click inside the Set Date & Time box, and then enter the current date and time.
6
Click Submit.
Sending a fax
Sending a fax using the printer control panel
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the paper guides.
3
On the home screen, touch Fax.
Faxing
112