Savin 3360DNP 用户手册
User Tools
152
4
5
IP Address
Sets the IP Address.
Note
❒ Default: 011.022.033.044
Reference
See the Printer Reference 1 for information about the IP Ad-
dress setting.
dress setting.
6
Ethernet Speed
Sets the Ethernet communication speed.
Note
❒ Default: Auto
7
Network
Sets the Network boot.
Note
❒ Default: NONE
Reference
See the Printer Reference 1 for information about the Net-
work boot setting.
work boot setting.
8
I/O Timeout
Sets the time to enable the interface after data stops being re-
ceived. When the time set here is exceeded, it will be possible to
receive data from the other interface.
ceived. When the time set here is exceeded, it will be possible to
receive data from the other interface.
Important
❒ If the set time is too short, a time out might occur while one
data is being received. As a result, data from another inter-
face might cut in and be printed, or the emulation retrieval
from half of the data may be activated, and be replaced with
a different emulation.
face might cut in and be printed, or the emulation retrieval
from half of the data may be activated, and be replaced with
a different emulation.
Note
❒ Default: 30 sec.
9
I/O Buffer
Sets the capacity of the reception buffer.
Note
❒ Default: 512KB
10
Menu Reset
You can reset the factory settings. However, the “IP Address”,
“Network”, and the “Ethernet Speed” settings do not change.
“Network”, and the “Ethernet Speed” settings do not change.
No.
Mode
Description