OKI 6500 用户手册

B6500 Series Setup Guide

English - 4

The main parts of the printer and a brief 
description of their functions are shown 
below:

      

Print jobs are output here with printed side 
facing down.

Consists of the control buttons, indicators and 
display.
For control panel details, refer to “The Control 
Panel and Menu system” on page 8.

Provide ventilation for the interior of the printer.

Indicates the level of the remaining paper in the 
550-sheet paper tray.

Holds 150 sheets of paper.

Holds 550 sheets of paper. 

Switches the printer power on and off.

Pull this tray out to print on paper larger than 
Letter.

      

For connecting the duplex unit (option).

For connecting the power cord.

For connecting a parallel cable.

For connecting the network cable when using 
the printer as a network printer. (The Network 
Software Kit option needs to have been installed 
to enable networking capability.)

For connecting a USB cable.

For connecting a serial cable.

Place the machine on a level and sturdy 
surface that can withstand the machine 
weight, 22.6 kg (50lb). If tilted, the machine 
may fall over and cause injuries.

The printer has ventilation holes on the side 
and rear panels. Ensure that the printer is 
installed with a minimum clearance of 255mm 
(10in) from the rear vent to any wall, 200mm 
(8in) from the left vent to any wall, and 
300mm (12in) from the right vent to any wall. 
A poorly ventilated machine can cause 
excessive internal heat and fire. The following 
diagram shows the minimum clearances 
required for normal operation, consumables 
replacement, and maintenance to ensure 
your machine operates at peak performance.     

 Ensure that the installation location meets 
the following conditions: