Konica Minolta BIZHUP C351 用户手册
Various Settings
10
C351
10-24
Local I/F Timeout
You can set the time until a communication timeout occurs for the parallel,
USB, or network interface. (Default setting: 60 seconds)
USB, or network interface. (Default setting: 60 seconds)
1
On the Administrator Setting screen, touch [7 Printer Setting].
–
For details on displaying the Administrator Setting screen, refer to
“To display the Administrator Setting screen” on page 10-21.
“To display the Administrator Setting screen” on page 10-21.
2
On the Printer Setting screen, touch [1 Local I/F Timeout].
The Local I/F Timeout screen appears.
3
Touch [Edit] below the setting that you are specifying.
4
Press the [C] (clear) key to erase the value, and then use the keypad to
type in the default length of time (between 10 and 300 seconds).
type in the default length of time (between 10 and 300 seconds).
–
If a value outside of the allowable range is specified, the message
“Input Error” appears. Type in a value within the allowable range.
“Input Error” appears. Type in a value within the allowable range.
5
Touch [OK].
The time until a communication timeout occurs is set.
To cancel changes to the settings, touch [Cancel].
To cancel changes to the settings, touch [Cancel].